I-PUK Triple Branch Union Plastic Poly Push In Tube to Tube Adapter Fittings
| INDLELA | A | B | C | D | E | E1 | F | Isisindo(g) |
| I-PUK06-01 | 6 | R1/8 | 7.5 | 76.5 | 20 | 12.5 | 14 | |
| I-PUK06-02 | 6 | R1/4 | 9 | 48 | 20 | 12.5 | 14 | |
| I-PUK06-03 | 6 | R3/8 | 10.5 | 79.5 | 20 | 12.5 | 3 | 17 |
| I-PUK08-01 | 8 | R1/8 | 7.5 | 86 | 23.5 | 14 | 3 | 14 |
| I-PUK08-02 | 8 | R1/4 | 9 | 87 | 23.5 | 14 | 3 | 14 |
| I-PUK08-03 | 8 | R3/8 | 10.5 | 89 | 23.5 | 14 | 3 | 17 |
| INDLELA | A | B | C | D | E | E1 | F | H1(Hex) Isisindo(g) |
| I-PUK06-G1 | 6 | G1/8 | 5.5 | 75.5 | 20 | 12.5 | 3 | 14 |
| I-PUK06-G2 | 6 | G1/4 | 6 | 76 | 20 | 12.5 | 3 | 14 |
| I-PUK06-G3 | 6 | G3/8 | 7 | 77 | 20 | 12.5 | 3 | 17 |
| I-PUK08-G1 | 8 | G1/8 | 5.5 | 85 | 23.5 | 14 | 3 | 14 |
| I-PUK08-G2 | 8 | G1/4 | 6 | 85.5 | 23.5 | 14 | 3 | 14 |
| I-PUK08-G3 | 8 | G3/8 | 7 | 86.5 | 23.5 | 14 | 3 | 17 |
| INDLELA | A | A1 | B | C | D | E | E1 | F | I-H1(Hex) |
| I-PUK06-04-G1 | 6 | 4 | G1/8 | 5.5 | 76 | 19.5 | 12.5 | 3 | 14 |
| I-PUK08-04-G2 | 8 | 4 | G1/4 | 6 | 76 | 19.5 | 12.5 | 3 | 14 |
| I-PUK08-06-G1 | 8 | 6 | G1/8 | 5.5 | 75.5 | 20 | 12.5 | 3 | 14 |
| I-PUK08-06-G2 | 8 | 6 | G1/4 | 6 | 76 | 20 | 12.5 | 3 | 14 |
| I-PUK10-08-G2 | 10 | 8 | G1/4 | 6 | 87 | 23.5 | 14 | 3 | 17 |
| I-PUK10-08-G3 | 10 | 8 | G3/8 | 7 | 88 | 23.5 | 14 | 3 | 17 |
| INDLELA | A | B | C | D | E | E1 | F |
| I-PK04 | 4 | 68.5 | 19.5 | 12.5 | 3 | ||
| I-PK06 | 6 | 69.5 | 20 | 12.5 | 3 | ||
| pk08 | 8 | 79 | 23.5 | 14 | 3 |
| INDLELA | A | B | C | D | E | F |
| I-PUK06-04 | 6 | 4 | 12 | 69 | 20 | 3 |
| I-PUK08-04 | 8 | 4 | 13 | 69 | 20 | 3 |
| I-PUK08-06 | 8 | 6 | 13 | 70 | 20.5 | 3 |
| I-PUK10-06 | 10 | 6 | 14 | 80.5 | 23 | 3 |
| I-PUK10-08 | 10 | 8 | 14.5 | 80.5 | 24 | 3 |
| INDLELA | A | A1 | B | C | D | E | E1 | F | I-H1(Hex) |
| I-PUK06-04-G1 | 6 | 4 | G1/8 | 5.5 | 76 | 19.5 | 12.5 | 3 | 14 |
| I-PUK08-04-G2 | 8 | 4 | G1/4 | 6 | 76 | 19.5 | 12.5 | 3 | 14 |
| I-PUK08-06-G1 | 8 | 6 | G1/8 | 5.5 | 75.5 | 20 | 12.5 | 3 | 14 |
| I-PUK08-06-G2 | 8 | 6 | G1/4 | 6 | 76 | 20 | 12.5 | 3 | 14 |
| I-PUK10-08-G2 | 10 | 8 | G1/4 | 6 | 87 | 23.5 | 14 | 3 | 17 |
| I-PUK10-08-G3 | 10 | 8 | G3/8 | 7 | 88 | 23.5 | 14 | 3 | 17 |
sicela ukunakwa: Izilinganiso kanye nokulethwa kwezinto ezingezona zesitoko ezihlinzekwe ngesicelo.Ukucushwa nobukhulu kungase kushintshe ngaphandle kwesaziso.
Ukufakwa kwePlastiki Push-In
Izici
- Ukufaka kalula futhi ukhiphe ngaphandle kwamathuluzi.
- Indlela yokukhiya ishubhu yensimbi engagqwali.
- I-thread sealant emicu ye-taper, i-O-ring face seal emiculweni ye-G.
- I-NBR njengempahla evamile yokuvala, ezinye izinto ziyatholakala uma uzicela.
- I-Nick plated indinganiso yokwelashwa kwe-bass surface, iqinisekisa ukuthi i-anti-corrosion kanye ne-anti-intamination.
- Isebenziseka kabusha-Ingahlanganiswa futhi ihlakazwe ngokuphindaphindiwe.(ncoma ukusika ingxenye yeshubhu eyonakele phezulu)
- Uchungechunge: BSPP, BSPT, NPT (Sicela usithinte ukuze uthole ezinye izitayela)
Ukucaciswa
| O-Ring Seal | I-NBR (ezinye izinto ezisetshenziswayo ziyatholakala uma ucelwa) |
| I-gripping Mechanism | Insimbi engagqwali |
| Izinga Lokushisa | 32° F kuya ku-140°F |
| I-Pressure Max | 150 PSI |
| Umsebenzi we-Vacuum | 29.5 Intshi Hg |
| Imidiya | Umoya Ocindezelwe |
Qaphela: Lokhu kwakusho kuphela njengesiqondiso sokusiza ekwakhiweni.Ukuhlolwa kwendawo kufanele kwenziwe ukuze kutholwe amanani angempela ohlelo lwakho lokusebenza.
Imiyalelo yokufaka
 |  |
| Umfanekiso 1 | Umfanekiso 2 |
Ukuxhuma ishubhu (bheka umfanekiso 1)
- Sika amashubhu ngokulinganayo–ubuningi be-engeli engu-15° obuvunyelwe.Kunconywa ukusetshenziswa kwe-tube cutter (PTC).
- Hlola ukuthi ichweba noma ingxenye yokukhwelana ihlanzekile futhi ayinayo imfucumfucu.
- Faka ishubhu ekulinganeni kuze kube phansi.Cindezela kabili ukuze uqinisekise ukuthi ishubhu lifakwe ngaphezu kwekholethi ne-O-Ring.
- Donsa ishubhu ukuze uqinisekise ukuthi ifakwe ngokugcwele.
Ukunqamula ishubhu (bheka umfanekiso 2)
- Vele ucindezele inkinobho yokukhulula, ubambe ngokumelene nomzimba, futhi ukhiphe amashubhu lapho kufanele.
