I-PRT Male Run Tee Plastic Poly Push In Tube to Pipe Adapter Fittings
| INDLELA | *A | B | C | D | E | F | I-H1(Hex) | Isisindo(g) |
| I-PRT04-M5 | 4 | M5*0 8d | 4 | 21 | 18 | 10 | 10.1 | |
| I-PRT04-M6 | 4 | M6*1.0p | 4.5 | 21 | 18 | 10 | 10.2 | |
| I-PRT04-01 | 4 | R1/8 | 7.5 | 22.9 | 18 | 10 | 10.1 | |
| I-PRT04-02 | 4 | R1/4 | 9 | 24.4 | 18 | 14 | 14.1 | |
| I-PRT06-M5 | 6 | M5″0.8p | 4 | 24 | 19.9 | 12 | 14.7 | |
| I-PRT06-M6 | 6 | M6*1.0p | 4.5 | 24.5 | 19.9 | 12 | 14.6 | |
| I-PRT06-01 | 6 | R1/8 | 7.5 | 25.4 | 19.9 | 12 | 15.1 | |
| I-PRT06-02 | 6 | R1/4 | 9 | 26.9 | 19.9 | 14 | 18 | |
| I-PRT06-03 | 6 | R3/8 | 10.5 | 28.4 | 19.9 | 17 | 22.9 | |
| I-PRT06-04 | 6 | R1/2 | 12 | 29.9 | 19.9 | 21 | 30.3 | |
| I-PRT08-01 | 8 | R1/8 | 7.5 | 26 | 22.9 | 14 | 19.2 | |
| I-PRT08-02 | 8 | R1/4 | 9 | 27.5 | 22.9 | 14 | 19.9 | |
| I-PRT08-03 | 8 | R3/8 | 10.5 | 29 | 22.9 | 17 | 25.4 | |
| I-PRT08-04 | 8 | R1/2 | 12 | 30.5 | 22.9 | 21 | 32.9 | |
| I-PRT10-01 | 10 | R1/8 | 7.5 | 29 | 27.2 | 17 | 30.2 | |
| I-PRT10-02 | 10 | R1/4 | 9 | 30.5 | 27.2 | 17 | 31 | |
| I-PRT10-03 | 10 | R3/8 | 10.5 | 32 | 27.2 | 17 | 35 | |
| I-PRT10-04 | 10 | R1/2 | 12 | 33.5 | 27.2 | 21 | 42.2 | |
| I-PRT12-01 | 12 | R1/8 | 7.5 | 31 | 29.2 | 19 | 38.6 | |
| I-PRT12-02 | 12 | R1/4 | 9 | 32.5 | 29.2 | 19 | 40.6 | |
| I-PRT12-03 | 12 | R3/8 | 10.5 | 34 | 29.2 | 19 | 42.6 | |
| I-PRT12-04 | 12 | R1/2 | 12 | 25.2 | 31.5 | 21 | 48.1 | |
| I-PRT14-03 | 14 | R3/8 | 10.5 | 40.7 | 31 | 21 | 61.9 | |
| I-PRT14-04 | 14 | R1/2 | 12 | 42.2 | 31 | 21 | 65.9 | |
| I-PRT16-03 | 16 | R3/8 | 10.5 | 41.5 | 32.5 | 24 | 74.5 | |
| I-PRT16-04 | 16 | R1/2 | 12 | 43.2 | 32.5 | 24 | 66.1 |
ENGEZA O-ring
| INDLELA | A | B | C | D | E | F | I-H1(Hex) | Isisindo(g) |
| I-PRT04-G1 | 4 | G1/8 | 5.5 | 22.2 | 18 | 14 | 12 | 12.3 |
| I-PRT04-G2 | 4 | G1/4 | 6 | 22.6 | 18 | 17 | 14 | 17 |
| I-PRT06-G1 | 6 | G1/8 | 5.5 | 24.6 | 19.9 | / | 14 | 17.2 |
| I-PRT06-G2 | 6 | G1/4 | 6 | 25.1 | 19.9 | 17 | 14 | 17.7 |
| I-PRT06-G3 | 6 | G3/8 | 7 | 26.1 | 19.9 | 21 | 17 | 23.1 |
| I-PRT06-G4 | 6 | G1/2 | 9 | 28.1 | 19.9 | 24 | 19 | 27.5 |
| I-PRT08-G1 | 8 | G1/8 | 5.5 | 25.2 | 22.9 | / | 14 | 19.6 |
| I-PRT08-G2 | 8 | G1/4 | 6 | 25.7 | 22.9 | 17 | 14 | 20.5 |
| I-PRT08-G3 | 8 | G3/8 | 7 | 26.7 | 22.9 | 21 | 17 | 25.6 |
| I-PRT08-G4 | 8 | G1/2 | 9 | 28.7 | 22.9 | 24 | 19 | 30.1 |
| I-PRT10-G1 | 10 | G1/8 | 5.5 | 28.7 | 27.2 | / | 17 | 29.9 |
| I-PRT10-G2 | 10 | G1/4 | 6 | 29 | 27.2 | / | 17 | 30.5 |
| I-PRT10-G3 | 10 | G3/8 | 7 | 30.2 | 27.2 | 21 | 17 | 34 |
| I-PRT10-G4 | 10 | G1/2 | 9 | 32.2 | 27.2 | 24 | 19 | 40.4 |
| I-PRT12-G1 | 12 | G1/8 | 5.5 | 30.5 | 29.2 | / | 19 | 37 |
| I-PRT12-G2 | 12 | G1/4 | 6 | 31 | 29.2 | / | 19 | 39.6 |
| I-PRT12-G3 | 12 | G3/8 | 7 | 32 | 29.2 | 21 | 19 | 42.8 |
| I-PRT12-G4 | 12 | G1/2 | 9 | 34 | 29.2 | 24 | 21 | 48.3 |
sicela ukunakwa: Izilinganiso kanye nokulethwa kwezinto ezingezona zesitoko ezihlinzekwe ngesicelo.Ukucushwa nobukhulu kungase kushintshe ngaphandle kwesaziso.
Ukufakwa kwePlastiki Push-In
Izici
- Ukufaka kalula futhi ukhiphe ngaphandle kwamathuluzi.
- Indlela yokukhiya ishubhu yensimbi engagqwali.
- I-thread sealant emicu ye-taper, i-O-ring face seal emiculweni ye-G.
- I-NBR njengempahla evamile yokuvala, ezinye izinto ziyatholakala uma uzicela.
- I-Nick plated indinganiso yokwelashwa kwe-bass surface, iqinisekisa ukuthi i-anti-corrosion kanye ne-anti-intamination.
- Isebenziseka kabusha-Ingahlanganiswa futhi ihlakazwe ngokuphindaphindiwe.(ncoma ukusika ingxenye yeshubhu eyonakele phezulu)
- Uchungechunge: BSPP, BSPT, NPT (Sicela usithinte ukuze uthole ezinye izitayela)
Ukucaciswa
| O-Ring Seal | I-NBR (ezinye izinto ezisetshenziswayo ziyatholakala uma ucelwa) |
| I-gripping Mechanism | Insimbi engagqwali |
| Izinga Lokushisa | 32° F kuya ku-140°F |
| I-Pressure Max | 150 PSI |
| Umsebenzi we-Vacuum | 29.5 Intshi Hg |
| Imidiya | Umoya Ocindezelwe |
Qaphela: Lokhu kwakusho kuphela njengesiqondiso sokusiza ekwakhiweni.Ukuhlolwa kwendawo kufanele kwenziwe ukuze kutholwe amanani angempela ohlelo lwakho lokusebenza.
Imiyalelo yokufaka
 |  |
| Umfanekiso 1 | Umfanekiso 2 |
Ukuxhuma ishubhu (bheka umfanekiso 1)
- Sika amashubhu ngokulinganayo–ubuningi be-engeli engu-15° obuvunyelwe.Kunconywa ukusetshenziswa kwe-tube cutter (PTC).
- Hlola ukuthi ichweba noma ingxenye yokukhwelana ihlanzekile futhi ayinayo imfucumfucu.
- Faka ishubhu ekulinganeni kuze kube phansi.Cindezela kabili ukuze uqinisekise ukuthi ishubhu lifakwe ngaphezu kwekholethi ne-O-Ring.
- Donsa ishubhu ukuze uqinisekise ukuthi ifakwe ngokugcwele.
Ukunqamula ishubhu (bheka umfanekiso 2)
- Vele ucindezele inkinobho yokukhulula, ubambe ngokumelene nomzimba, futhi ukhiphe amashubhu lapho kufanele.
